1
1-59 Installing EFI Fiery Mail Port
ES3640e MFP EFI User’s Software Installation Guide - 59
Installing EFI Fiery Mail Port
The E-Mail Service provides a method to print and control the
ES3640e MFP remotely. Jobs are sent to the ES3640e MFP in the
form of e-mail attachments. You can set up e-mail printing on
Windows computers by adding the EFI Fiery Mail Port software as
a printer port.
To set up the Fiery for e-mail printing, see Chapter 4 of the
Configuration Guide. After Setup has been performed, install the
software from the Utilities CD (CD2) onto your Windows
computer, and then add a port.
Note:Procedures are given for Windows 98/Me and
Windows NT 4.0. Procedures for Windows 2000/XP/Server 2003
are similar to those for Windows NT 4.0.
To install the e-mail port monitor on Windows
computers
1. Insert the Utilities CD (CD2) supplied with your ES3640e MFP into your
CD drive.
Normally the Installer program should autorun. If it does not,
navigate to the top level directory window of the CD and run
setup.exe.
2. Select Fiery Utilities.
3. Click on Install Fiery Mail Port and follow the on-screen prompts to install
the mail port to your computer.
To Next Page
Loading...
Need help?
General
