Oki MC563 User Manual

- 173 -
10. Operating Management/Specifications
Changing the Administrator Password
It is recommended to change the administrator password to protect your security. Set the
administrator password using from 6 to 12 alphanumeric characters. Be careful not to forget
the set password.
1
Press the (SETTING) button on the operator panel.
2
Press the button to select [Admin Setup] and press the (OK) button.
3
Enter the administrator password.
The factory default administrator name and password are "admin" and "999999" respectively.
4
Select [Enter], and then press the (OK) button.
5
Press or several times and press [Manage Unit].
6
Press or several times and press [Admin Password].
7
Enter a new password, and then press [OK].
8
Enter the password again.
9
Press [OK].

Oki MC563 Specifications

General

Brand	Oki
Model	MC563
Category	All in One Printer
Language	English