Oki ML620 User Manual

ML620/ML621 User’s Guide 23
Loading Cut Sheet Paper
There are two methods of loading single sheets of
cut sheet paper, top feed and front feed. See the
following pages for instruction.
Cut Sheet Paper, Top and Front Feed
Make sure the printer is turned ON.
Note: If there is any continuous forms paper in the
printer, eject it as described in “Removing
Continuous Forms Paper”.
Make sure that the Pin Tractor covers are closed to
avoid the possibility of paper jams.
Place the Paper Type lever in the cut sheet position:
To load the cut sheet in the Top Feed Paper tray,
raise the top tray.
To load the cut sheet in the Front Feed Paper tray,
open the front cover and install the front paper tray.
1.
2.
3.
4.
Set the left margin of the paper by adjusting the
appropriate Paper Guides (1) along the scale (2)
relative to the start of the printed line marker
arrow.
5.
2
1
1
2

Oki ML620 Specifications

General

Color	-
Maximum resolution	288 x 72 DPI
Mean time between failures (MTBF)	25000 h
Sound pressure level (printing)	55 dB
Sound pressure level (quiet mode)	52 dB
Standard interfaces	USB 2.0
Windows operating systems supported	Windows 2000, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
AC input voltage	120 V
Dimensions (WxDxH)	438 x 375 x 191 mm