Oki ML620 User Manual

ML620/ML621 User’s Guide 29
Resetting Top of Form to the Factory
Default
The factory default setting for the Top of Form
(where the printing should begin) is 11/12”
(23.28 mm) down from the top of the page.
To reset the Top of Form to the factory default:
Remove paper from the paper path.
Turn the printer off.
Press and hold LF/FF + TEAR while turning on the
printer.
Reload paper.
1.
2.
3.
4.
Temporarily Changing the Top of Form
Position
Important
Do not use the platen knob to change the Top of Form.
If you turn the platen knob when the printer is turned
ON, the Top of Form misaligns. Always turn the printer
OFF before turning the platen knob!
To move the Top of Form position lower for one page
only:
Press SEL to deselect the printer.
Press LF to lower the position of the Top of Form.
1.
2.

Oki ML620 Specifications

General

Color	-
Maximum resolution	288 x 72 DPI
Mean time between failures (MTBF)	25000 h
Sound pressure level (printing)	55 dB
Sound pressure level (quiet mode)	52 dB
Standard interfaces	USB 2.0
Windows operating systems supported	Windows 2000, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
AC input voltage	120 V
Dimensions (WxDxH)	438 x 375 x 191 mm