Oki ML620 User Manual

ML620/ML621 User’s Guide 28
Setting Top of Form (TOF):
Notes:
Adjusting the TOF can be done in cut sheet or
continuous forms mode.
If necessary, print the menu settings to
determine where the current TOF is set.
The default TOF is set at 11/12” (23.28 mm).
With paper loaded and the printer on and selected:
Align the paper with the rst print line position as
follows:
To set the TOF lower (the rst line of print on
the page moves down), press and hold down
the LOAD/EJECT and SEL keys at the same
time.
To set the TOF higher (the rst line of print on
the page moves up), press and hold down the
LOAD/EJECT and LF/FF keys at the same time.
The paper moves in increments of 1/144”.
When you have the TOF set where you want it,
press and hold SEL, then press LF/FF to save the
new setting.
Note: To reset the Top of Form to the factory default,
see “Resetting Top of Form to the Factory
Default” later in this chapter.
1.


2.

Oki ML620 Specifications

General

Color	-
Maximum resolution	288 x 72 DPI
Mean time between failures (MTBF)	25000 h
Sound pressure level (printing)	55 dB
Sound pressure level (quiet mode)	52 dB
Standard interfaces	USB 2.0
Windows operating systems supported	Windows 2000, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
AC input voltage	120 V
Dimensions (WxDxH)	438 x 375 x 191 mm