Oki ML620 User Manual

ML620/ML621 User’s Guide 26
Top of Form (TOF)
Important!
If you turn the platen knob when the printer is on,
the Top of Form misaligns. Always shut the printer off
before turning the platen knob.
Note: The factory default setting for the Top of Form
(where the printing should begin) is 11/12”
(23.28 mm) down from the top of the page.
Top of Form sets the print start position for the
printer. It is adjustable in increments of 1/144 of an
inch.
The rst line prints at the default top of form.
Top of Form (TOF) and Forms Tear-Off
Note: Your software may print the rst line of print
above or below where TOF is set. You may
need to adjust the TOF to meet your software’s
requirements.
The Top of Form and Forms Tear-Off settings of
your printer interact. How you set the Top of Form
depends on whether Forms Tear-Off is ON (set to
500 ms, 1 sec, or 2 sec) or OFF (the factory default
setting).

Oki ML620 Specifications

General

Color	-
Maximum resolution	288 x 72 DPI
Mean time between failures (MTBF)	25000 h
Sound pressure level (printing)	55 dB
Sound pressure level (quiet mode)	52 dB
Standard interfaces	USB 2.0
Windows operating systems supported	Windows 2000, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
AC input voltage	120 V
Dimensions (WxDxH)	438 x 375 x 191 mm