ML690/ML691 User’s Guide 28
Determining if Forms Tear-Off is Off or
On
When the TEAR light is blinking, it indicates that the
printer is in TEAR position (i.e., the paper is ready to
be torn off).
There are two ways to determine the status of the
Forms Tear-Off menu setting:
Print the Menu
Use the TEAR key
To print the Menu:
Make sure paper is loaded.
Press the SEL key (1).
Hold down the CHR PITCH (2) key and press the
PRINT SPEED key (3).
Press the PRINT QUALITY (4) key to print the
menu.
1.
2.
3.
4.
Look for the Form Tear-Off setting in the paper
feed group you are using.
To use the TEAR key:
Make sure paper is loaded.
Press TEAR (5).
If the paper moves up, Forms Tear-off is off.
If the paper moves down, Forms Tear-off is on.
5.
1.
2.
To Next Page
Loading...
Need help?
General
