57
3
1
Choose a file that contains a segment
you want to play back repeatedly, and
press the PLAY or OK button.
File playback begins.
2
Press the button at the point you
want to start segment repeat
playback.
[ End?] will flash on the display.
Even while [
End?] is flashing, changing the
playback speed (☞ P52), fast forward and
rewind (☞ P48) can be executed the same as
during normal playback, and it can be
advanced quickly to the end position.
When it reaches to the end of the file while
[ End?] is flashing, the point will become the
end position, and repeat playback will start.
3
Press the button again at the
position where you want to end
segment repeat playback.
The [ Play] message appears, and repeat
playback will start. The recorder repeatedly
plays back the segment until the segment
repeat playback is canceled.
As in regular play mode, playback speed (☞ P52) can be changed
during segment repeat playback as well. If an index mark and temp
mark (☞ P73) are inserted or eliminated during segment repeat
playback, segment repeat playback will be canceled and it will return
to regular play mode.
This function enables repeated playback of part of the file being played.
How to begin segment repeat playback
How to begin segment repeat playback
1
2
3
To Next Page
Loading...
Need help?
General
