90
5
1
While the recorder is stopped, press
the MENU button for 1 second or
longer.
The menu opens. (☞ P97, 99)
2
Press the + or – button to choose
[Backlight].
3
Press the OK or 9 button.
The [Backlight] setup process begins.
4
Press the + or – button to choose
between [On] and [Off].
[On]: Backlight is enabled.
[Off]: Backlight is disabled.
5
Press the OK button to complete the
setup screen.
If the 0 button is pressed, the setting will
be canceled and it will return to the menu.
6
Press the STOP button to close the
menu.
Backlight (Backlight)
The recorder display backlight is On by default. The display will remain lit for about 10 seconds
when a button on the recorder is pressed.
Backlight
5
6
1
2
3
4
To Next Page
Loading...
Need help?
General
