84
4
1
While the recorder is stopped, press
the MENU button for 1 second or
longer.
The menu opens. (
☞
P97, 99)
2
Press the + or – button to choose
[Power Save].
3
Press the OK or 9 button.
The [Power Save] setup process begins.
4
Press the + or – button to choose
between [5min.], [10min.], [30min.],
[1hour] and [Off].
If the power save mode is set to [Off], the
recorder will not switch over to the power
save mode. Leaving the recorder in such a
condition will result in the rapid consumption
of batteries.
5
Press the OK button to complete the
setup screen.
If the 0 button is pressed, the setting will
be canceled and it will return to the menu.
6
Press the STOP button to close the
menu.
You can exit power save mode by pressing any
button.
Changing Power Save (Power Save)
Changing Power Save
If the recorder is on and stops for 10 minutes or longer (default), the display shuts off and it
goes into power save mode. You can set the time to enter power save from among [5min.]
[10min.], [30min.], [1hour], and [Off].
5
6
1
2
3
4
To Next Page
Loading...
Need help?
General
