Olympus E-M10 Mark III S User Manual

Menu functions (Custom menus)
4
123 EN
Viewing camera images on TV (HDMI)
MENU G O [HDMI]
Use the separately sold cable with the camera to playback recorded images on your
TV. This function is available during shooting. Connect the camera to an HD TV using
an HDMI cable to view high-quality images on a TV screen.
Type A
HDMI cable
(Connect to the HDMI connector on
the TV.)
HDMI micro connector
Connect the TV and camera and switch the input source of the TV.
• The camera monitor turns o󰀨 when an HDMI cable is connected.
• For details on changing the input source of the TV, refer to the TV’s instruction manual.
• Depending on the TV’s settings, the displayed images and information may become
cropped.
• If the camera is connected via an HDMI cable, you will be able to choose the digital video
signal type. Choose a format that matches the input format selected with the TV.
4K Priority is given to 4K HDMI output.
1080p Priority is given to 1080p HDMI output.
720p Priority is given to 720p HDMI output.
480p/576p 480p/576p HDMI output.
• Do not connect the camera to other HDMI output devices. Doing so may damage the
camera.
• HDMI output is not performed while connected via USB to a computer or printer.
• When [4K] is selected, video output in shooting mode is [1080p].
Using the TV remote control
The camera can be operated by a TV remote control when connected to a TV that
supports HDMI control. Select [On] for [HDMI Control]. When [On] is selected,
camera controls can be used for playback only.
• You can operate the camera by following the operation guide displayed on the TV.
• During single-frame playback, you can display or hide the information display by
pressing the “Red” button, and display or hide the index display by pressing the
“Green” button.
• Some televisions may not support all features.

Olympus E-M10 Mark III S Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Image Processor	TruePic VIII
Screen Type	Tilting Touchscreen LCD
Connectivity	Wi-Fi
Battery	BLS-50 Lithium-ion
Built-in Flash	Yes
Dimensions	121.5 x 83.6 x 49.5 mm
Sensor Size	17.3 x 13 mm (Four Thirds)
Effective Pixels	16.1 Megapixels
Image Stabilization	5-axis sensor-shift
Continuous Shooting Speed	8.6 fps
Shutter Speed	1/4000 - 60 sec, Bulb
Viewfinder Type	Electronic (EVF)
Viewfinder Resolution	2, 360, 000 dots
Screen Size	3.0 inch
Video Recording	4K UHD at 30p
Battery Life	330 shots (CIPA)
Weight	410 g (with battery and memory card)
Sensor Resolution	17.2 Megapixel (total)
ISO Sensitivity	200 - 25600 (expandable to 100 - 25600)
Screen Resolution	1.04 Million dots