Olympus TG-630 - Setting the Date and Time

46
EN
Saving battery power between
Saving battery power between
shots
shots
d
d
[Power Save]
[Power Save]
Submenu 2 Application
Off Cancels [Power Save].
On
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
To resume standby mode
To resume standby mode
Press any button.
Changing the display language
Changing the display language
d
d
[
[
l
l
]
]
Submenu 2 Application
Languages
The language for the menus and
error messages displayed on the
monitor is selected.
Setting the date and time
Setting the date and time
d
d
[
[
X
X
]
]
1 Press the joystick to FG to select the year for
[Y].
2 Press the joystick to I to save the setting for [Y].
3 As in Steps 1 and 2, press the joystick to
FGHI to set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order),
and then press the A button.
● For precise time setting, press the A button as the
time signal strikes 00 seconds.
To check the date and time
To check the date and time
Press the Y button while the camera is turned off.
The current time is displayed for approx. 30 seconds.