Omron 1S Series Startup Guide

8
Related Manuals
The following manuals are related. Use these manuals for reference.
Manual name
Cat. No.
Model
Application
Description
1S-Series AC
Servomotors/Servo Drives
with Built-in EtherCAT
Communications and
Safety Functionality User’s
Manual
I621
R88D-1SAN-ECT
R88M-1A□
Learning detailed
specifications of a 1S-series
Servo Drive Advance Type.
Describes how to install and wire the
Servo Drive, set parameters needed to
operate the Servo Drive, and remedies
to be taken and inspection methods to
be used in case that problem occur.
Sysmac Studio Version 1
Operation Manual
W504
SYSMAC-SE2□□□
Learning about the operating
procedures and functions of
the Sysmac Studio.
Describes the operating procedures of
the Sysmac Studio.
Sysmac Studio Drive
Functions Operation
Manual
I589
SYSMAC-SE2□□□
Learning how to set up and
adjust the Servo Drives.
Describes the operating procedures of
the Sysmac Studio.
NX-series CPU Unit
Hardware User’s Manual
W535
NX701-□□□□
Learning the basic
specifications of the
NX-series CPU Units,
including introductory
information, designing,
installation, and
maintenance. Mainly
hardware information is
provided.
Provides an introduction to the entire
NX-series system along with the
following information on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX102 CPU unit
Hardware User’s Manual
W593
NX102-□□□□
Learning the basic
specifications of the NX102
CPU Units, including
introductory information,
designing, installation, and
maintenance. Mainly
hardware information is
provided.
Provides an introduction to the entire
NX102 system along with the following
information on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX1P2 CPU unit
Hardware User’s Manual
W578
NX1P2-□□□□
Learning the basic
specifications of the NX1P2
CPU Units, including
introductory information,
designing, installation, and
maintenance. Mainly
hardware information is
provided.
Provides an introduction to the entire
NX1P2 system along with the following
information on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection

Omron 1S Series Specifications

General

Brand	Omron
Model	1S Series
Category	Servo Drives
Language	English