To Next Page

To Previous Page

2. Preparation

2.1

Battery Installation

1. Remove the battery cover.

2. Insert 4 “AA” batteries as

indicated in the battery

compartment.

3. Replace the battery cover.

NOTES:

• When the depleted battery symbol “ ” appears on the display, turn your monitor off, then replace all

batteries at the same time. Long life alkaline batteries are recommended.

• After replacing batteries, “-/ - -:--” appears on the date and time display during or after measurement.

Before taking measurements, your monitor needs to be set with the correct date and time.

Measurements taken without date and time settings do not sync. For setting the date and time

manually, refer to section 2.3.

• The readings continue to be stored in memory even after batteries are replaced.

• The supplied batteries may have a shorter life than new batteries.

• Disposal of used batteries should be carried out in accordance with local regulations.

Omron BP769CAN User Manual

Questions and Answers: