33
6. Other Settings
EN
6.3
Restoring Your Monitor to the Default
Setting
To delete all the information stored in your monitor, follow the instructions below. Make sure that the
monitor is turned off. It is off when the screen is not showing numbers or symbols.
1. While holding the button down,
press the [START/STOP] button
for more than 5 seconds.
2. Release the button and [START/STOP]
button when “CLr” appears on the display.
The “CLr” appears on the display when the monitor setting has
reverted back to its original.
NOTES:
• Your monitor automatically turns off without any operations.
• Reverting to its default setting of your monitor does not delete the information in the app.
• Make sure to re-pair your monitor when using the monitor again. Without re-pairing, your readings are
not transferred to your app.
To Next Page
Loading...
Need help?
General
