28
5. Using the Memory Function
5.1
Viewing Your Readings Stored in the
Memory
Your monitor automatically stores readings up to 60 for each user (1 and 2).
It can also calculate an average value based on the last 3 readings taken within
10 minutes.
NOTES:
• When there are only 2 readings in the memory for that period, the average is displayed based on these
2 readings.
• When there is 1 set of readings in the memory for that period, it is displayed as the average.
• When the memory is full, your monitor deletes the oldest readings.
• When viewing the readings taken without setting the date and time, “-/ - -:--” is displayed instead of the
date and time.
1. Select your user ID (1 or 2).
2. Press the button.
The memory number appears for approximately one
second before the pulse rate is displayed. The newest
set is numbered “1”.
To Next Page
Loading...
Need help?
General
