Omron E2E series User Manual

7
．
IO-Link Connection Procedure
23
7.5. Controller Setup
Set up Controller.
Setting the Device Variables 7.5.1.
Set the device variables to use for Slave Terminal.
1
Double-click I/O Map under
Configurations and Setup in
the Multiview Explorer.
2
The I/O Map Tab Page is
displayed in the Edit Pane.
Check that Node1 is displayed
in the Position Column and that
the added Slave Terminal is
displayed in the Port Column.
*To manually set a variable
name for Slave Terminal, click
an entry cell in the Variable
Column and enter a name.
3
Right-click Node1 and select
Create Device Variable.
4
The variable names and types
are set.

Omron E2E series Specifications

General

Brand	Omron
Model	E2E series
Category	Network Hardware
Language	English