22
When necessary
11. Measuring Weight Only
When this mode is used, personal number cannot be inferred automatically.
When this mode is used, your measurement result will not be recorded.
When the power of the unit is off, take a measurement directly without taking the panel unit from the
holder.
1
Step on the unit with the power off
•
You cannot get correct measurement results on mat, carpet or other soft ground. Please implement the
"0 kg correction" before taking the measurement.
(
P12
)
•
Just step onto the unit, it will power on automatically and start the measurement.
2
Check the measurement results
•
You can also take out the panel unit to check measurement results.
3
Press the power switch to turn off the power
•
The power turns off if the unit is not used for 3 minutes.
NOTES
•
If your weight is less than 30kg, please use the following method to measure.
Press power switch to turn on the power
Press the button to select ,
and then press the
button to confirm.
After "0.0 kg" is displayed, step on the unit.
Blinks three times to show that
weight has been determined.
To Next Page
Loading...
Need help?
General
