10
2.Preparation
2.2 Setting the Date and Time
Your blood pressure monitor automatically stores up to 100
measurement values in its memory and calculates an average
value based on the last three measurements. To make use of
the memory and average value function:
• Set the monitor to the correct date and time before taking a
measurement for the first time.
• If the batteries have been removed for a long period of time,
the date and time setting will need to be reset.
1. Press the Date/Time setting
( ) button. The year digits
(2009) will flash on the display.
Notes:
• The range for the year setting
is 2009 to 2030. If the year
reaches 2030, it will return to 2009.
• If you need to reset the date and time, press the
button until the setting you want to adjust appears on the
display, then press the Date/Time setting ( ) button to
change the setting.
2. Press the button to advance
the digits one at a time.
Note: If you hold down the
button, the digits will
advance rapidly.
3. Press the button to confirm
the setting when the desired
number appears on the display.
The year setting is set and the
month digits will flash.
HEM-6052-C1_B_M.fm Page 10 Tuesday, March 9, 2010 9:15 AM
To Next Page
Loading...
Need help?
General
