22
3.Using the Monitor
3.3 Using the Memory Function
The monitor is designed to store the blood pressure and the
pulse rate in the memory for two people (user A and user B)
every time a measurement is completed.
The monitor automatically stores up to 100 sets of measurement
values (blood pressure and pulse rate) for each user (A and B).
The monitor also displays an average reading based on the
three most recent sets of measurement values taken within 10
minutes of the most recent reading.
Notes:
• To ensure that the measurement results are recorded
correctly, make sure that the date and time are set
correctly before taking a measurement.
• When 100 sets of readings are stored in memory, the
oldest set will be deleted to store a new set.
• The date and time of stored readings will be alternately
displayed.
To View the Average Value
Press the MEM button.
HEM-6052-C1_B_M.fm Page 22 Tuesday, March 9, 2010 9:15 AM
To Next Page
Loading...
Need help?
General
