23
3.Using the Monitor
To View Previous Readings Stored in Memory
1. Press the MEM button, while the average reading is
displayed, to view readings stored in memory from the
most recent to the oldest.
2. Press the MEM button repeatedly to cycle through the
readings.
To Delete All Values in Memory
The values stored in the memory are deleted by user ID.
You cannot partially delete values stored in the memory. All
values for the user you select will be deleted.
When the memory symbol ( ) appears, first press the MEM
button, then while holding it down, press the START/STOP
button simultaneously for more than 2-3 seconds.
Alternating
display
HEM-6052-C1_B_M.fm Page 23 Tuesday, March 9, 2010 9:15 AM
To Next Page
Loading...
Need help?
General
