11
2. Preparation
2.2 Setting the Date and Time
Your blood pressure monitor automatically stores up to 84
measurement values per user with date and time.
To make use of the memory and average values functions:
• Set the unit to the correct date and time before taking a
measurement for the first time.
• If the batteries have been removed for more than 30
seconds, the Date/Time setting will need to be reset.
1. When the START/STOP
button is pressed to turn
the unit on for the first time
after inserting batteries,
the year digits (2007) will
flash on the display.
2. Press the MEMORY button
to advance the digits one
at a time.
Notes:
• The range for the year
setting is 2007 to 2030. If
the year reaches 2030, it
will return to 2007.
• If you hold down the
MEMORY button, the
digits will advance
rapidly.
3. Press the SET button to confirm the setting when the
desired number appears on the display.
The year is set and the month digits flash on the display.
HEM-7080-C1_B_M.fm Page 11 Tuesday, March 9, 2010 9:05 AM
To Next Page
Loading...
Need help?
General
