Omron NX-SL series User Manual

4 Safety Function Blocks
4 - 122
NX-series Safety Control Unit Instructions Reference Manual (Z931)
8010 32784 ESPE Free No Test S_OSSD_In is set to TRUE (the AOPD is receiv-
ing light). A sensor test has not been performed.
Ready = TRUE
S_OSSD_Out = TRUE
S_TestOut = TRUE
TestPossible = TRUE
TestExecuted = FALSE
Error = FALSE
8020 32800 Test Request An automatic sensor test is in progress. The FB
is waiting for the signal from the sensor to
change to FALSE. The time from when a test
was requested from the sensor until the sensor
signal changes to FALSE is being monitored.
Ready = TRUE
S_OSSD_Out = TRUE
S_TestOut = FALSE
TestPossible = FALSE
TestExecuted = FALSE
Error = FALSE
8030 32816 Test Active An automatic sensor test is in progress. The FB
is waiting for the signal from the sensor to
change to FALSE. The time from when a test
was requested from the sensor until the sensor
signal changes to TRUE is being monitored.
Ready = TRUE
S_OSSD_Out = TRUE
S_TestOut = TRUE
TestPossible = FALSE
TestExecuted = FALSE
Error = FALSE
8000 32768 ESPE Free Test ok The FB did not detect a safety request. The sen-
sor was tested automatically.
Ready = TRUE
S_OSSD_Out = TRUE
S_TestOut = TRUE
TestPossible = TRUE
TestExecuted = TRUE
Error = FALSE
8012 32786 ESPE Interrupted 2 The FB detected a safety request. The sensor
was tested automatically.
Ready = TRUE
S_OSSD_Out = FALSE
S_TestOut = TRUE
TestPossible = FALSE
TestExecuted = TRUE
Error = FALSE
DiagCode (hexadecimal)
DiagCode
(decimal)
Status name Status description and output results

Omron NX-SL series Specifications

General

Brand	Omron
Model	NX-SL series
Category	Control Unit
Language	English