Omron R88D-1SN ECT Series Startup Guide

27
Right-click Axis Settings in the Multiview Explorer and select Axis setting table.
Axis number has been set to 0 and 1, Axis type to Servo axis and Output device 1 to
Node: 1 and Node: 2 on CH1 (Channel 1).
Project transfer to synchronize Sysmac Studio project and the CPU unit
2.
Click the Connect Button on the Toolbar
Click the Transfer to Controller Button on the Toolbar
Click the Execute Button to transfer the project from the computer to the CPU unit

Omron R88D-1SN ECT Series Specifications

General

Brand	Omron
Model	R88D-1SN ECT Series
Category	Controller
Language	English