3-1
3-1 Servo Drive Specifications
OMNUC G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
3
Specifications
3-1 Servo Drive Specifications
Select a Servo Drive that matches the Servomotor to be used. Refer to Servo Drive and
Servomotor Combination Tables on page 2-10.
General Specifications
Note 1. The above items reflect individual evaluation testing. The results may differ under compound conditions.
Note 2. Never perform dielectric strength or other megameter tests on the Servo Drive. Failure to follow this guideline
may result in damaging the internal elements.
Note 3. Depending on the operating conditions, some Servo Drive parts will require maintenance. For details, refer to
12-5 Periodic Maintenance on page 12-31.
Item Specifications
Ambient operating
temperature and operating
humidity
0 to 55°C, 90% max. (with no condensation)
Storage ambient temperature
and humidity
−20 to 65°C, 90% max. (with no condensation)
Operating and storage
atmosphere
No corrosive gases
Vibration resistance 10 to 60 Hz and at an acceleration of 5.88 m/s
2
or less (Not to be run continuously at
a resonance point)
Insulation resistance Between power supply terminals/power terminals and FG terminal: 0.5 MΩ min. (at
500 VDC)
Dielectric strength Between power supply/power line terminals and FG terminal: 1,500 VAC for 1 min at
50/60 Hz
Protective structure Built into panel
EC
Directives
EMC
Directive
EN 55011, EN 61000-6-2, IEC 61800-3
Low Voltage
Directive
EN 61800-5-1
Machinery
Directive
EN954-1 (Category 3), EN ISO 13849-1: 2008 (PLc,d), ISO 13849-1: 2006 (PLc,d),
EN61508 (SIL2), EN62061 (SIL2), EN61800-5-2 (STO), IEC61326-3-1 (SIL2)
UL standards UL 508C
CSA standards CSA22.2 No. 14
International standard
To Next Page
Loading...
Need help?
General
