Regulations and standards
S8BA-24D24D□□□LF
Regulations and standards
Use overseas
To export (or provide to non-residents of Japan) a model of this product that is categorized as a
merchandise (or technology) requiring the export permission and approval stipulated by the Foreign
Exchange and Foreign Trade Law, the export permission and approval (or service transaction
permission) in accordance with the said law are required.
Conformance to EC Directives
●Applicable directives
▪ EMC Directives
●Principles regarding conformance
OMRON electronic devices that comply with EC Directives also conform to the related EMC
standards so that they can be more easily built into other devices or the overall machine. The actual
products have been checked for conformity to EMC standards*.
Whether the products conform to the standards in the system used by the customer, however, must
be checked by the customer. EMC-related performance of the OMRON devices that comply with EC
Directives will vary depending on the configuration, wiring, and other conditions of the equipment or
control panel on which the OMRON devices are installed. The customer must, therefore, perform the
final check to confirm that devices and the overall machine conform to EMC standards.
*Applicable EMC (Electromagnetic Compatibility) standards are as follows: EMS (Electromagnetic
Susceptibility): EN 61000-6-2, EMI (Electromagnetic Interference): EN 61000-6-4, and EN 61000-6-4
Radiated emission: 10-m regulations
●Conformance to EC Directives
This product complies with EC Directives. To ensure that the machine or device in which the this
product is used complies with EC Directives, the product must be installed as follows:
▪ This product must be installed within a control panel.
▪ You must use reinforced insulation or double insulation for the DC power supply connected to this
product.
▪ Models of this product that comply with EC Directives also conform to the Common Emission
Standard. Radiated emission characteristics (10-m regulations), in particular, may vary depending
on the configuration of the control panel used, other devices connected to the control panel, wiring,
and other conditions. Therefore, even when using a model of this product that complies with EC
Directives, you must confirm and ensure the compliance to EC Directives of the entire machine or
equipment.
▪ This is a Class A product (for industrial environments). In a residential environment, it may cause
radio interference. If radio interference occurs, the user may be required to take appropriate
measures.
To Next Page
Loading...
Need help?
General
