Omron STC-HD213 Series User Manual

No. 20S071-01
STC-HD213DV / STC-HD213DV-CS / STC-HD213SDI / STC-HD213SDI-CS /
STC-HD213DVN / STC-HD213DVN-CS / STC-HD213SDIN / STC-HD213SDIN-CS
Product Specifications and User
’
s Guide
78/94
Push button function list
Value Function Function Descriptions
0x00 Disabled Disables push button control
0x01 Display Menu Displaying the menu on screen
0x02 Push Lock WB [Save to EEPROM] Execute Push to set white balance process then save mode and gain settings
to EEPROM
0x03 WB mode (AWB) [Save to EEPROM] Sets “Auto” white balance mode, and save mode setting to EEPROM
0x04 Change H Inversion Switches horizontal flipped image and normal image
0x05 Change V Inversion Switches vertical flipped image and normal image
0x06 Change HV Inversion Switches horizontal and vertical flipped image and normal image
0x07 Change H Inversion [Save] Switches horizontal flipped image and normal image, then save to EEPROM
0x08 Change V Inversion [Save] Switches vertical flipped image and normal image, then save to EEPROM
0x09 Change HV Inversion [Save] Switches horizontal and vertical flipped image and normal image then save to EEPROM
0x0A Change display marker Switches enable and disable marker display
0x0B Change display line Switches enable and disable line marker display
0x0C Change display shadow Switches enable and disable shadow mask display
0x0D Change display circle marker Switches enable and disable circle maker display
0x0E Change display marker [Save] Switches enable and disable marker display, then save to EEPROM
0x0F Change display line [Save] Switches enable and disable line marker display, then save to EEPROM
0x10 Change display shadow [Save] Switches enable and disable shadow mask display, then save to EEPROM
0x11 Change display circle marker [Save] Switches enable and disable circle maker display, then save to EEPROM
0x12 H Line Maker1 position (+) Moves horizontal line marker1 to bottom.
0x13 H Line Maker1 position (-) Moves horizontal line marker1 to top.
0x14 V Line Maker1 position (+) Moves vertical line marker1 to left.
0x15 V Line Maker1 position (-) Moves vertical line marker1 to right.
0x16 H Line Maker2 position (+) Moves horizontal line marker to bottom
0x17 H Line Maker2 position (-) Moves horizontal line marker2 to top.
0x18 V Line Maker2 position (+) Moves vertical line marker2 to left.
0x19 V Line Maker2 position (-) Moves vertical line marker2 to right.
0x1A Shadow mask Top (+) Expands height of shadow mask top to bottom.
0x1B Shadow mask Top (-) Contracts height of shadow mask top to top.
0x1C Shadow mask Bottom (+) Contracts height of shadow mask bottom to bottom.
0x1D Shadow mask Bottom (-) Expands height of shadow mask bottom to top.
0x1E Shadow mask Left (+) Expands height of shadow mask left to right.
0x1F Shadow mask Left (-) Contracts height of shadow mask left to left.
0x20 Shadow mask Right (+) Contracts height of shadow mask right to right.
0x21 Shadow mask Right (-) Expands height of shadow mask right to left.
0x22 Circle maker H position (+) Moves center of circle marker to right.
0x23 Circle maker H position (-) Moves center of circle marker to left.
0x24 Circle maker V position (+) Moves center of circle marker to bottom.
0x25 Circle maker V position (-) Moves center of circle marker to top
0x26 Change still image Switches still image display and live image display
* This is available for STC-HD213DV, HD213DV-CS, H213SDI and HD213SDI-CS
0x27 User preset (+) Switches user preset (0 to 1 to XX to 7 to 0 to …)
0x28 Reset user preset Resets user preset to put it back that saved EERPOM

Omron STC-HD213 Series Specifications

General

Brand	Omron
Model	STC-HD213 Series
Category	Digital Camera
Language	English