Omron SYSMAC C60P User Manual

67
Appendix B
Specifications
General Ratings
General Ratings
Supply voltage
Operating voltage range
Power consumption
24-VDC output*
Insulation resistance
Dielectric strength
Noise immunity
Vibration
Shock
Ambient temperature
Humidity
Grounding
Structure
Weight CPUs
Expan. I/O Units
Dimensions (CPUs and
Expan. I/O Units)
-A suffix: 100 to 240 VAC 50/60 Hz
-D suffix: 24 VDC
-A suffix: 85 to 264 VAC
-D suffix: 20.4 to 26.4 VDC
-A suffix: 60 VA max.
-D suffix: 40 W max.
0.3 A 24 VDC +10% (Use as DC power supply)
10 MW min. (at 500 VDC) between AC terminals and housing**
2,000 VAC 50/60 Hz for 1 min (between AC terminals and housing), Leakage current: 10 mA max.
500 VAC 50/60 Hz for 1 minute (between DC terminals and housing), Leakage current: 1 mA max.
1,000 V p–p, pulse width: 100 ns to 1 ms, rise time 1 ns
10 to 35 Hz, 2 mm double amplitude, in X, Y, and Z directions; 2 hours each. (When mounted on a
DIN rail: 16.7 Hz, 1 mm double amplitude, in X, Y, and Z directions, 1 hour each.)
10 G in X, Y, and Z directions, 3 times each
Operating: 0% to 55%C
Storage: –20% to 65%C
35% to 85% (without compensation)
Less than 100 W
IEC IP-30 (mounted in a panel)
C20K, C28K: 1.9 kg max; C40K: 2.2 kg max.; C60K: 2.6 kg max.
C20P, C28P: 1.7 kg max.; C40P: 2.0 kg max.; C60P: 2.4 kg max.
C20K, C28K: 250 (W) x 110 (H) x 100 (D); C40K: 300 (W) x 110 (H) x 100 (D);
C60K: 350 (W) x 140 (H) x 100 (D)
*This output is not provided on models with the suffix -D in the model number (models accepting a DC supply voltage).
*Disconnect the LR terminal from the GR terminal when testing the insulation resistance. Failure to do so will destroy internal circuits.

Omron SYSMAC C60P Specifications

General

Brand	Omron
Model	SYSMAC C60P
Category	Controller
Language	English