Omron Sysmac NA Series User Manual

4 Creating and Transferring a Project
4 - 4
NA-series Programmable Terminal Soft-NA User’s Manual (V126)
The procedure for converting a project created for the NA5-series PT is described below.
Additional Information
The project to be converted must be Runtime Ver. 1.11 or below.
1 Start Sysmac Studio.
2 Click Open Project.
3 Select the project to be converted, and then click Open Button.
When converting a project created for the NA5-series PT

Omron Sysmac NA Series Specifications

General

Brand	Omron
Model	Sysmac NA Series
Category	Touch terminals
Language	English