17
En
Basic Operations
When you turn the DIRECT feature on (default value), the
unit bi-passes the tone control circuits that adjust the bass
and treble, taking the shortest route which favors sound
quality.
0 PHASE MATCHING BASS/BASS/TREBLE cannot be
adjusted when DIRECT feature is on.
1. Press DIRECT on the main unit or the remote controller to
switch on or off. The DIRECT indicator lights when on.
PHASE MATCHING BASS
Turning the PHASE MATCHING BASS function on
maintains smooth and powerful bass reproduction while
effectively keeping the mid-range clear and making vocals
and strings stand out (The default value is “off”).
0 This cannot be set when DIRECT is on (default value).
Press DIRECT to turn the DIRECT indicator off before
operating. Note that the PHASE MATCHING BASS
setting reverts to the previous setting when the DIRECT
function is turned off.
1. Press PHASE MATCHING BASS on the main unit or PM
BASS on the remote controller to switch on or off. The
PHASE MATCHING BASS indicator lights when on.
BASS (main unit only)
0 This cannot be set when DIRECT is on (default value).
Press DIRECT to turn the DIRECT indicator off before
operating.
1. Turn the BASS -/+ controller to enhance or moderate the
bass.
TREBLE (main unit only)
0 This cannot be set when DIRECT is on (default value).
Press DIRECT to turn the DIRECT indicator off before
operating.
Using the Direct Function
1
DIRECT
Adjusting the sound quality and
balance
PMBASS
SN29403405_A-9110_En_1806XX.book 17 ページ ２０１８年７月５日 木曜日 午後２時４３分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
