Onkyo A-9110 User Manual

2
Before use
Be fore use
Before use
What’s in the box ................................................ 2
Safety Information .............................................. 3
Part Names ............................................................ 5
Front Panel ........................................................ 5
Rear Panel ......................................................... 6
Remote Controller ..............................................7
Preparations
Connections .......................................................... 9
Connecting speakers ......................................... 9
Connecting a Powered subwoofer ................... 10
Connecting players (LINE IN connection) ........ 10
Connecting players (Turntable connection) ......11
Connecting with Onkyo RI Components ...........11
Power Cord Hookup.......................................... 12
Setup .................................................................... 13
Remote controller preparations ........................ 13
Turn on the power of the unit ........................... 13
Speaker impedance settings ............................ 14
Basic Operations
Playback .............................................................. 15
Switching input and adjusting the volume ........ 15
Subwoofer output settings ............................... 16
Using the Direct Function ................................. 17
Adjusting the sound quality and balance ......... 17
Others
Useful functions ................................................. 19
Setting auto standby ........................................ 19
Troubleshooting ................................................. 20
Specifications ..................................................... 22
1. Main unit (1)
2. Remote controller (RC-968S) (1), batteries (AAA/R03) (2)
≥ Instruction Manual (This document)
0 Connect speakers with 4 ≠ to 16 ≠ impedance.
0 The power cord must be connected only after all other
cable connections are completed.
0 We will not accept responsibility for damage arising from
the connection of equipment manufactured by other
companies.
0 Specifications and appearance are subject to change
without prior notice.
Table of Contents What’s in the box


SN29403405_A-9110_En_1806XX.book 2 ページ ２０１８年７月５日 木曜日 午後２時４３分

Onkyo A-9110 Specifications

General

Output level	4 mV
Amplifier class	-
Frequency range	20 - 20000 Hz
Output impedance	4 Ω
Input sensitivity	200 mV
Audio output channels	2.0 channels
Peak power per channel	100 W
Signal-to-Noise Ratio (SNR)	103 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (3 Ohm)	220 W
Dynamic power per channel (4 Ohm)	190 W
Dynamic power per channel (8 Ohm)	110 W
DC-in jack	Yes
Audio (L/R) in	4
Audio (L/R) out	1
Headphone connectivity	6.3 mm
Speakers connectivity type	Banana connector
Purpose	Home
Impedance	47 Ω
Product color	Black
Volume control	Rotary
Connectivity technology	Wired
AC input voltage	220 - 230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	130 W
LED indicators	Status
Package weight	9000 g

Weight and Dimensions

Depth	330 mm
Width	435 mm
Height	129 mm
Weight	7000 g