Onkyo A-9110 User Manual

7
En
Before use
Operating this unit
1. Í button: Sets this unit to On or Standby.
2. Cursors (D/C/B/A), ENTER button: Select the item
with the cursors and press ENTER to confirm.
3. VOLUME buttons
4. INPUT(D/C) buttons: Switches the input source to be
played.
5. SETUP button: Switches to the settings menu. Make
speaker impedance settings (p14), subwoofer output
settings (p16), and auto standby settings (p19).
6. RETURN button: Returns the display to the previous
display/state during setting.
7. MUTING button: Temporarily mutes audio. Press again to
cancel muting.
8. DIRECT button: Switch the DIRECT feature on and off.
(p17)
9. PM BASS button: Switch the PHASE MATCHING BASS
feature on and off. (p17)
Remote Controller









SN29403405_A-9110_En_1806XX.book 7 ページ ２０１８年７月５日 木曜日 午後２時４３分

Onkyo A-9110 Specifications

General

Output level	4 mV
Amplifier class	-
Frequency range	20 - 20000 Hz
Output impedance	4 Ω
Input sensitivity	200 mV
Audio output channels	2.0 channels
Peak power per channel	100 W
Signal-to-Noise Ratio (SNR)	103 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (3 Ohm)	220 W
Dynamic power per channel (4 Ohm)	190 W
Dynamic power per channel (8 Ohm)	110 W
DC-in jack	Yes
Audio (L/R) in	4
Audio (L/R) out	1
Headphone connectivity	6.3 mm
Speakers connectivity type	Banana connector
Purpose	Home
Impedance	47 Ω
Product color	Black
Volume control	Rotary
Connectivity technology	Wired
AC input voltage	220 - 230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	130 W
LED indicators	Status
Package weight	9000 g

Weight and Dimensions

Depth	330 mm
Width	435 mm
Height	129 mm
Weight	7000 g