EasyManuals Logo
Home>Onkyo>Amplifier>A-9110

Onkyo A-9110 User Manual

Onkyo A-9110
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
En
Others
Headphone output is intermittent or there’s no
sound
0 The connection part may be dirty. Clean the headphones
plug. See your headphones’ instruction manual for
cleaning information. Also, make sure that the
headphones cable is not broken or damaged.
RI linking isn't working properly
0 Make sure that the RI REMOTE CONTROL jacks are
properly connected.
0 A connection to the RI REMOTE CONTROL jack is not
enough for the units to operate as a system. Connect the
Analog audio cable properly. (p11)
0 Make sure that the batteries are installed with the correct
polarity.
0 Install new batteries. Do not mix different types of
batteries, or old and new batteries.
0 Make sure that the unit is not subjected to direct sunshine
or inverter-type fluorescent lights. Relocate if necessary.
0 If the unit is installed in a rack or cabinet with colored-
glass doors or if the doors are closed, the remote
controller may not work reliably.
Strange noises can be heard from the unit
0 If you have connected another unit to the same wall outlet
as this unit, this noise may be an effect from the other
unit. If the symptoms improve by unplugging the power
cord of the other unit, use different wall outlets for this unit
and the other unit.
The RI linking feature
Remote Controller
Others
SN29403405_A-9110_En_1806XX.book 21 ージ 018年7月5日 木曜日 午後2時43分

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo A-9110 and is the answer not in the manual?

Onkyo A-9110 Specifications

General IconGeneral
Output level4 mV
Amplifier class-
Frequency range20 - 20000 Hz
Output impedance4 Ω
Input sensitivity200 mV
Audio output channels2.0 channels
Peak power per channel100 W
Signal-to-Noise Ratio (SNR)103 dB
Total Harmonic Distortion (THD)0.05 %
Dynamic power per channel (3 Ohm)220 W
Dynamic power per channel (4 Ohm)190 W
Dynamic power per channel (8 Ohm)110 W
DC-in jackYes
Audio (L/R) in4
Audio (L/R) out1
Headphone connectivity6.3 mm
Speakers connectivity typeBanana connector
PurposeHome
Impedance47 Ω
Product colorBlack
Volume controlRotary
Connectivity technologyWired
AC input voltage220 - 230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.2 W
Power consumption (typical)130 W
LED indicatorsStatus
Package weight9000 g
Weight and Dimensions IconWeight and Dimensions
Depth330 mm
Width435 mm
Height129 mm
Weight7000 g

Related product manuals