En-18
Basic Operation
To turn on the CBX-500/CBX-600UKD, press the
[ON/STANDBY] button on the CBX-500/
CBX-600UKD or remote controller. The STANDBY
indicator goes off.
Press the [ON/STANDBY] button again to set the
CBX-500/CBX-600UKD to Standby. The STANDBY
indicator lights up.
Press the VOLUME Up [] button to increase the vol-
ume or the VOLUME Down [] button to decrease it.
You can also use the remote controller’s VOLUME []/
[] buttons.
You can select CD, iPod, DAB
*1
, FM, AM, USB
*2
, or
LINE, which can be an external component.
To select the input source, use the remote controller’s
INPUT SELECTOR buttons. On the CBX-500/
CBX-600UKD, press the [INPUT] button repeatedly.
The input sources are selected in the following order.
*1. DAB can be selected only on the CBX-600UKD.
*2. USB can be selected only on the CBX-500 European model.
Turn down the volume, then connect your stereo head-
phones to the PHONES minijack on the rear panel.
You can adjust the volume and mute the sound as nor-
mal.
The speakers output no sound while the headphones are
connected.
To Next Page
Loading...
Need help?
General
