En-48
Using the Timers—Continued
Notes:
• You must set the clock before you can program the
timers.
• Before programming a timer to turn on the radio, you
must preset the station you want to use. (See pages 37
and 38.)
• If you don’t operate any buttons for 60 seconds while
programming a timer, the procedure will be cancelled
and the previous display will reappear.
1
Press the [TIMER] button repeatedly to
select timer 1, 2, 3, or 4, and then press
[ENTER].
If “Clock” appears first, you need to set the clock
(see pages 17 and 45).
2
Use the Up/Down []/[] buttons to select
“Snooze On” or “Snooze Off”, and then
press [ENTER].
3
Use the Up/Down []/[] buttons to select
the source, and then press [ENTER].
You can select the following sources:
• CBX-500 European model
FM, AM, USB, LINE, CD, or iPod
• CBX-500 North American model
FM, AM, LINE, CD, or iPod
• CBX-600UKD
FM, DAB, USB, LINE, CD, or iPod
If you selected USB, LINE, CD, or iPod, proceed
to step 5.
4
• CBX-500
If you selected FM or AM, use the Up/Down
[]/[] buttons to select the radio preset,
and then press [ENTER].
• CBX-600UKD
If you selected DAB or FM, use the Up/Down
[]/[] buttons to select the radio preset,
and then press [ENTER].
5
Use the Up/Down []/[] buttons to select
“Once” or “Every”, and then press
[ENTER].
Select “Once” for one-off operation. Select
“Every” to perform the same operation every week.
If you selected “Every”, proceed to step 7.
6
If you selected “Once”, use the Up/Down
[]/[] buttons to select the day, and then
press [ENTER].
You can select: SUN, MON, TUE, WED, THU,
FRI, or SAT.
Proceed to step 9.
Programming the Timers
To Next Page
Loading...
Need help?
General
