En-19
Basic Operation—Continued
To mute the CBX-500/CBX-600UKD,
press the remote controller’s [MUTING]
button.
“Muting” appears on the display for a few
seconds. The MUTING indicator flashes
continuously while the CBX-500/CBX-600UKD is
muted.
To unmute the CBX-500/CBX-600UKD, press the
[MUTING] button again.
Tips:
While the CBX-500/CBX-600UKD is muted:
• Press the VOLUME []/[] buttons on the CBX-500/
CBX-600UKD or pressing the VOLUME []/[]
buttons on the remote controller will unmute the
CBX-500/CBX-600UKD.
• If you turn the CBX-500/CBX-600UKD off, the next
time you turn it on, the CBX-500/CBX-600UKD will
be unmuted.
Use the BASS []/[] and TRE-
BLE []/[] buttons to adjust the
bass and treble, respectively.
The default setting is “0.” You can
adjust the bass and treble from –5 to
+5.
Note:
• If you press no buttons for 8 seconds, the previous dis-
play will appear automatically.
To turn on Super Bass, press the [S.BASS]
button.
Press the [S.BASS] button repeatedly to
select S.Bass 1, S.Bass 2, or S.Bass 3.
To turn off Super Bass, press the [S.BASS]
button repeatedly until “S.Bass Off” appears.
Press the remote controller’s [DIMMER] but-
ton repeatedly to select the following options:
Muting the CBX-500/CBX-600UKD
To Next Page
Loading...
Need help?
General
