23
En
■ There’s no sound, or it’s very quiet
■ The subwoofer produces no sound
■ Noise can be heard
■ The remote controller doesn’t work
■ The controller and the TV operated by
your TV remote controller doesn’t
work
■ Volume +/– or Muting function works
by also pressing other buttons when
operating controller with your TV
remote controller
Audio
Make sure that all audio connecting
plugs are pushed in all the way.
15
Make sure that the input of TV is
connected properly.
15
Make sure that the polarity of the
speaker cables is correct, and that the
bare wires are in contact with the metal
part of each speaker terminal.
14
Make sure that the speaker cables are
not shorting.
14
When the ON/STANDBY LED flashes
white, the muting is enabled. Press
on the remote controller or the
Volume –/+ buttons simultaneously on
the controller to disable the muting.
18
Make sure that none of the connecting
cables are bent, twisted, or damaged.
—
Make sure that there is no obstacle or
reflection between the controller and the
subwoofer.
—
Make sure that the pairing the controller
and the subwoofer completes normally.
—
Using cable ties to bundle audio cables
with power cords, speaker cables, and
the like may degrade the audio
performance, so refrain from doing it.
—
An audio cable may be picking up
interference. Try repositioning your
cables.
—
Remote Controller
Make sure that the battery is installed
with the correct polarity.
8
Make sure that the remote controller is
not too far away from the controller, and
that there’s no obstruction between the
remote controller and the controller’s
remote control sensor.
8
Make sure that the controller is not
subjected to direct sunshine or inverter-
type fluorescent lights. Relocate if
necessary.
—
If the controller is installed in a rack or
cabinet with colored-glass doors, the
remote controller may not work reliably
when the doors are closed.
—
Make sure that the controller mounted
to the wall and the TV set are not placed
too far.
11
Your TV remote controller might not be
compatible with TV remote controller
preprogrammed codes function. If the
ON/STANDBY LED does not flash by
pressing the buttons on your TV remote
controller, use the supplied remote
controller or program the controller. If
the controller cannot be operated with
your remote controller even if the
programming has been performed, the
controller might not recognize your
remote controller. In this case, use the
supplied remote controller.
—
For some TV remote controller,
Volume +/– or Muting function might
work by also pressing other buttons.
(Volume is increased by pressing 0
(number button), etc.) To avoid this,
program the controller with Volume +/–
or Muting button function on your TV
remote controller.
21
To Next Page
Loading...
Need help?
General
Weight and Dimensions
