EasyManuals Logo

Onkyo TX-RZ710 User Manual

Onkyo TX-RZ710
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
57
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Spotify
This unit supports Spotify Connect. To enable Spotify
Connect, install the Spotify application on your smartphone
or tablet and create a Spotify premium account.
This unit needs to be connected to the same router as
the smartphone or tablet.
Refer to the following for Spotify settings:
www.spotify.com/connect/
The Spotify software is subject to third party licenses
found here:
www.spotify.com/connect/third-party-licenses
Playing Back
1. Connect the smartphone to the network that this unit is
connected to.
2. When the power of this unit is on, click the Connect icon
in the track play screen of the Spotify app.
3. Select this unit.
4. The input selector of this unit automatically changes to
NET and streaming of Spotify starts.
When "Network Standby" in the Setup menu is set to
"On", by clicking the Connect icon and selecting this
unit, then even if this unit is in standby mode, the power
will come on automatically and streaming starts.
Operations with the remote controller:
4
51
2
3
1
: This button plays the previous track.
2
: This button lets you start repeat or random
playback. Pressing this button repeatedly cycles
through the repeat modes.
3
: Pressed during play, this button changes the
displayed track information.
4
: Pressed during play this button pauses
playback. Pressed while paused, and it restarts play.
5
: This button plays the next track.
Notes for using multi-zone (for compatible
models only)
To enjoy Spotify music in a separate room, manually
select "NET" as the input of the separate room. After
doing that, select this unit with the Spotify app.
Volume adjustment with the Spotify app is possible only
for speakers connected to the ZONE speaker terminals
or when the volume of the audio device in the other
room is configured so that its volume can be adjusted
on this unit. Adjust the volume on the audio equipment
in the other room in any other case.
To enjoy Spotify music in the main room after playing
it in a separate room, select "NET" as the input of the
main room.
Icons on the display
: Playing
: Pause
: Artist
: Album

Other manuals for Onkyo TX-RZ710

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-RZ710 and is the answer not in the manual?

Onkyo TX-RZ710 Specifications

General IconGeneral
Impedance6 Ω
Receiver typeSurround
Input sensitivity200 mV
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)106 dB
Total Harmonic Distortion (THD)0.08 %
Dynamic power per channel (3 Ohm)250 W
Dynamic power per channel (4 Ohm)220 W
Power output per channel (20-20KHz@8 Ohm)130 W
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Internet radioYes
Supported radio bandsAM, FM
Preset stations quantity40
Internet radio services supportedPandora, Spotify, TuneIn
Optical drive includedNo
DisplayLCD
Audio decodersDTS-HD Master Audio, Dolby TrueHD
Multi-Zone quantity2
RS-232 ports1
Speakers connectivity typeClamp terminals
THX-certifiedTHX Select2 Plus
Package depth468 mm
Package width570 mm
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.15 W
Power consumption (typical)600 W
Bluetooth version4.1
HDMI in8
Headphone connectivity3.5 mm
Weight and Dimensions IconWeight and Dimensions
Depth378 mm
Width435 mm
Height288 mm
Weight10500 g

Related product manuals