Onyx RCR User Manual

BATTERY CHARGING
Charging the battery is similar to plugging in a laptop charger, but you should always
charge/store your battery in a safe place. Below are the steps to charging your battery
in or out of the bike.
STEP 1: Make sure the battery is in the
“OFF” position. Plug the charger into the
wall and then plug in your battery.
+ Never leave your battery on the
charger after it is done charging.
Although the battery charger does have
a cut o this is good practice to keep
your battery safe.
+ Only use the provided charger. Use of
after-market high-speed chargers is at
your own risk.
+ Avoid constant exposure to extreme
temperatures for a long battery life.
+ Always charge your battery before use
after sitting for a few days
+ Long term storage should be stored
at 50% charged at room temperature.
Never store the battery on empty.
Charge your stored battery every 3
months to maintain the life of the
battery.
+ Avoid fully discharging your battery
frequently to prolong the life of the cells.
+ Keep the bike o while charging the
battery in the bike. You can turn the
bike on to check the battery charging
progress but do not leave the power on.
+ Do not drop the battery.
+ Do not use a damaged battery.
+ Always unplug the battery when
working on the bike.
STEP 2: The charger light will change
from green to red after the battery is
connected. When the battery is done
charging the light will turn green.
STEP 3: When the battery is done
charging unplug the battery.
BATTERY CARE/MAINTENANCE/SAFETY TIPS
Maintaining and caring for your battery will help prolong it’s life while promoting safe
and ecient use. Below are some of the top tips for keeping a healthy battery.

Onyx RCR Specifications

General

Brand	Onyx
Model	RCR
Category	Bicycle
Language	English