1
INTRODUCTION
1-1
BEFORE INSTALLATION
Warning
Failure to follow the instructions provided with this indication and improper
handling may cause death or serious injury.
Caution
Failure to follow the instructions provided with this indication and improper
handling may cause injury and/or property damage.
The check
mark indicates recommendation.
The nix sign indicates prohibition.
Warning
Caution Caution
Do not remove the PCB. Do not remove the separate box
tamper.
Do not touch the PCB except for the
DIP switch.
ON
123456
ON
123456
Mounting height. Keep the detector parallel to the
ground.
Consider the direction a person is
approaching from, as well as the
detection area.
Install the detector in a place where it is free from false alarm factors. For example:
Sunlight and reflection• Heat source• Objects moving in the wind •
0.8 – 1.2 m
(2'7" – 3'11")
Parallel
Tilt
- 2 -
To Next Page
Loading...
Need help?
General
