Optima OPF-P Series User Manual

OPF-P Series
User Manual / Using Scale
1
8/13
Using Scale
Basic Weighing
After the scale has been properly calibrated, the scale is now ready for use:
1. If scale is not on, turn the scale on.
2. Make sure the display is showing 0 after initialization. If not, press the ZERO
key to zero out the display.
3. Place the object(s) of interest on the scale pan as close to the center as possible.
4. Read the value on the display.
5. Remember NOT to overload the scale since this may permanently damage the
scale.
Zero
Press ZERO key to zero the scale.
Units
Press UNIT key to change; Available units are kilograms, grams, pounds, or
ounces.
Tare
To tare, follow the procedure below:
1. Make sure the scale is stabilized.
2. Press the ZERO key.

Optima OPF-P Series Specifications

General

Brand	Optima
Model	OPF-P Series
Category	Scales
Language	English