Contents
Previous Versions of the Service Manual Incorrectly State That a FEM Is Only
Supported on CMOD 0 (CR 7107085) ...................................................... 23
Links to Oracle Websites Have Been Updated ............................................ 23
Name Correction for Oracle Integrated Lights Out Manager .......................... 24
Front Mounting Bracket Illustration from Installation Guide is Incorrect .......... 24
Oracle x86 Products Accessibility .................................................................... 27
Hardware Accessibility ................................................................................... 27
Oracle ILOM Accessibility ............................................................................. 28
Oracle Hardware Management Pack Accessibility ............................................... 29
BIOS Accessibility ........................................................................................ 29
Documentation Accessibility ........................................................................... 30
Hardware Issues ................................................................................................ 31
System Posts CPU Fault and Fails to Boot On System With Six Sun InfiniBand Dual
Port 4x QDR PCIe Low Profile Host Channel Adapter M2 Cards (22536804) ........... 32
Reset Takes a Long Time and Causes the Server to Power Cycle ............................ 32
Update SP Firmware After Replacing a CMOD or SP Module (15465497) ............... 33
MegaCLI CfgEachDskRaid0 Command Does Not Work Correctly (CR 7121867) ....... 33
DIMM Mismatch on Odd Numbered Pairs Results in DDR Training Failed on Entire
Branch (CR7101624 and CR7111545) ............................................................... 34
If DIMM Failure Causes Branch Failure, Oracle ILOM Might Not Identify Them as
Faulty (CR7099038 and CR7111543) ................................................................ 35
When Inserting a CMOD, Simultaneously Rotate Handles Until They Touch the
Chassis ........................................................................................................ 35
Video Output of CMM Is Distorted or Missing ................................................... 35
SATA Drives Not Accessible Through NEM1 (CR 7003993) ................................. 36
Supported Rack Mounting Configuration ........................................................... 36
DIMM Population Rules ................................................................................. 36
Matching Parameters .............................................................................. 37
DIMM Population Order ........................................................................ 37
Locking Screws Secure Shelf Rails to Rear Mounting Brackets .............................. 39
▼ How to Install the Locking Screws ...................................................... 39
Message About Missing Disks After Failed Boot (CR 6939507) ............................ 41
System Does Not Power Up After Power Cycling (CR 6950414) ........................... 41
System Does Not Recognize DIMM Due to SPD Corruption (CR 6946921) ............. 41
▼ How to Identify a Corrupted DIMM .................................................... 42
6 Sun Fire X4800 Server Product Notes • July 2017
To Next Page
Loading...
Need help?
General