72 Sun SPARC Enterprise T5140 and T5240 Servers Installation Guide • December 2010
▼ Install the Slide Rail Assemblies
Note – Ensure that you have all of the parts in the rackmounting kit before you
begin the installation of the server.
The rackmounting kit contains two slide rail assemblies, which can be installed on
either the right or left side of the rack.
A slide rail assembly consists of two parts, a slide rail and a removable mounting
bracket. The slide rail attaches to the rack posts. The mounting bracket attaches to the
server chassis.
1. Pull both mounting brackets completely out of their respective slide rails.
a. Simultaneously press and hold the upper and lower lock buttons of the slide
rail lock.
FIGURE: Unlocking the Express Rail Slide Rail Assembly
b. Pull the mounting bracket out until it stops.
To Next Page
Loading...
Need help?
General