To Next Page

To Previous Page

User’ Guide

1 192.168.100.1 192.168.100.21

DNS server(1) 68.6.16.30

DHCP server lease time : 1800

IP Mapping Table:

Index Global IP Local IP

1 68.5.203.16 192.168.100.22

Port Mapping Table:

Index Port Local IP Protocol

1 21 192.168.100.23 tcp

¾ nat static portmapping delete {index/all}

Remove the entry from the Port Mapping Table

index: The index number in Port Mapping Table (see “show nat config” command )

CM>nat static portmapping delete 1

Delete static portmapping index 1 from Port Mapping Table

NAT static ip

¾ nat static ip {enable|disable|ipaddress}

Enable/disable NAT/PAT gateway function or assign global ip

CM>nat static ip disable

Static IP will be disabled after "reset" command.

CM>nat static ip enable

Static IP will be enabled after "reset" command.

¾ nat static ip {ipaddress} mask (mask)

Set static IP and network mask for NAT/PAT

Example:

CM>nat static ip 68.5.203.15 mask 255.255.254.0

Set NAT public IP to 68.5.203.15, subnet mask to: 255.255.254.0

NAT static gateway

¾ nat static gateway {ipaddress}

Orion 2000 User Manual

Questions and Answers: