User’ Guide
57
CM>access-list 21 permit 192.168.100.10 0.0.0.0
Note: No network packet will be filtered
3) Set the access list to permit source MAC 00D0.5921.3354 to access network
CM>access-list 41 permit 00d0.5921.3354 ffff.ffff.ffff
Note: The cable router only forward packet with this source MAC, all other packet will be discarded.
¾ access-list delete {list ID|all}
Delete a specific access-list or delete all access-list.
PPPoE-Forwarding
¾ pppoe-forwarding {enable|disable}
Enable|disable PPPoE packet pass-through the NAT gateway.
Copy
¾ copy tftp:config {tftp server ip address} {configuration filename}
Download the Cable Router configuration from remote tftp server. The configuration file must be text
file.
Example:
CM>copy tftp:config 68.5.203.15 4ips.txt
Download the 4ips.txt Cable Router configuration from TFTP server 68.5.203.15
Clear
¾ clear arp
Clear ARP table.
CPE-limit
¾ cpe-limit ip {1-256|unlimited}
Limit the number of CPEs based on IPs, or unlimited
¾ cpe-limit mac {1-256|unlimited}
To Next Page
Loading...
Need help?
General