52 GB/IE
Note: Ensure that the outdoor sensor shouldn’t be immersed into
water and not contact with direct sunlight. Electronic devices may
adversely affect the wireless signal reception.
Setting the time format / zone / date / time /
language / temperature unit manually
The reception of DCF radio signal where the temperature station
has been positioned may become degraded or interrupted. If this
happens you can set the product manually.
1. Press and hold down the MODE button
18
for about 3 seconds.
2. Press the + button
19
or – button
17
to switch between the
12-and 24-hour clock display modes.
Tip: Press and hold the + button
19
or the – button
17
will
quickly scan ahead or back through the numbers. If during a
period of 20 seconds no buttons are pressed, the LC display
returns automatically to the default display.
3. Press the MODE button
18
to confirm your settings.
4. Press the + button
19
or – button
17
to set the desired time
zone for Second time zone (–12 hours to +12 hours).
To Next Page
Loading...
Need help?
General
