Start/Stop button ( )
• During scanning, pressing this button stops scanning.
• If you press this button after a double feed is detected and scanning has been paused in pull scan,
scanning will stop without scanning the document.
• If you set [Wait Key] for "Manual Feed Mode" in your application software, pressing this button starts
scanning. For details about "Manual Feed Mode", refer to the Image Capture Plus, TWAIN, or ISIS
help.
OK button
Cursor button
• Used to select items on the LCD screen.
• Use or of the cursor button at the basic screen in the ready mode to set the Small/Thin paper
mode (page 52).
• Use or of the cursor button at the basic screen in the ready mode to select the position of feed
tray (100 sheets / 200 sheets / Maximum).
Ready LED (Green)
Shows the scanner’s status. For details, refer to "5.1 About LED" (page 31).
5 Operation Panel
29
To Next Page
Loading...
Need help?
General