2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure. 1) --------3
2Warning--------------------------------------------------------------4
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------4
2.2. How to Recycle the Lithium Ion Battery
(U.S.A. and Canada Only) -------------------------------4
2.3. How to Replace the Lithium Battery-------------------5
3 Service Navigation------------------------------------------------6
3.1. Introduction --------------------------------------------------6
3.2. Important Notice -------------------------------------------6
3.3. Service Notes -----------------------------------------------7
3.4. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.5. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------9
4 Specifications ---------------------------------------------------- 14
5 Location of Controls and Components------------------ 16
6 Service Mode ----------------------------------------------------- 18
6.1. Error Code Memory Function ------------------------- 18
7 Troubleshooting Guide---------------------------------------- 22
7.1. Wi-Fi Circuit (WIFI/BT P.C.B.)------------------------- 22
8 Service Fixture & Tools --------------------------------------- 23
8.1. Service Fixture and Tools ------------------------------ 23
8.2. When Replacing the Main P.C.B. -------------------- 24
8.3. Service Position ------------------------------------------ 24
9 Disassembly and Assembly Instructions --------------- 25
9.1. Disassembly Flow Chart-------------------------------- 25
9.2. P.C.B. Location ------------------------------------------- 26
9.3. Disassembly Procedure -------------------------------- 27
9.4. Lens Disassembly Procedure------------------------- 40
9.5. Assembly Procedure for the Lens (Phase
Alignment)-------------------------------------------------- 45
9.6. The Application of Grease Method ------------------ 51
9.7. Removal of the MOS Unit ------------------------------ 52
10 Measurements and Adjustments -------------------------- 53
10.1. Introduction ------------------------------------------------ 53
10.2. Before Disassembling the unit ------------------------ 53
10.3. Details of Electrical Adjustment----------------------- 56
10.4. After Adjustment------------------------------------------ 63
11 Maintenance ------------------------------------------------------ 64
11.1. Cleaning Lens, Viewfinder and LCD Panel -------- 64
12 Block Diagram --------------------------------------------------- 65
12.1. Overall Block Diagram ---------------------------------- 65
13 Wiring Connection Diagram --------------------------------- 66
13.1. Interconnection Diagram ------------------------------- 66
14 Schematic Diagram--------------------------------------------- 67
15 Printed Circuit Board ------------------------------------------ 67
16 Exploded View and Replacement Parts List ----------- 67
To Next Page
Loading...
Need help?
General
