Preparations
Using the [Setup] menu
- 40 - VQT4J11
• For the setting procedures of the menu. (→25)
[VIERA Link]
Enable automatic linking with other VIERA Link-compatible devices, and operability with a
VIERA remote control when connecting via an HDMI mini cable (optional) (→185).
■
Settings
[ON]: Operations may be performed via the remote control of the VIERA Link-
compatible device. (Not all operations will be available.)
Operability of the camera’s own buttons will be limited.
[OFF]: Operations must be performed via the camera’s own buttons.
[3D Playback]
Set how 3D still picture is output.
■
Settings: [3D] / [2D]
●
If you want to play back a picture in 2D (conventional picture) on a 3D television, set
to [2D].
●
This item of the menu functions when an HDMI mini cable (optional) is connected.
●
For the procedure for playing back a 3D still picture (→187).
[Rotate Disp.]
Automatically rotate portrait still pictures.
■
Settings
: Rotate and display pictures displayed on a TV screen as well as those
displayed on the LCD monitor of the camera in portrait orientation.
: Rotate and display only pictures displayed on a TV screen in portrait orientation.
[OFF]
●
[Rotate Disp.] cannot be used with motion pictures.
●
Still pictures taken with the lens surface facing up or down, or still pictures taken on
other cameras may not rotate.
●
Pictures cannot be rotated during Multi Playback.
●
Will only be displayed rotated on computer if in Exif-compatible (→152) environment
(OS, software).
To Next Page
Loading...
Need help?
General
