Others
Using with your PC
- 192 - VQT4J15
Connect camera to computer
• Do not use cables other than the supplied USB connection cable or a genuine
Panasonic USB connection cable (optional). Using cables other than the above
may cause a malfunction.
Use cursor button on the camera to select [PC], and press
[MENU/SET]
• A message may be displayed on screen if [USB Mode] (→39) is set to
[PictBridge(PTP)]. Select [CANCEL] to close the screen, and set [USB Mode] to
[PC].
Operate with your computer
You can save pictures to use on your computer by dragging and dropping folders
and files into separate folders on your computer.
■
To cancel connection
• Windows: Execute “Safely Remove Hardware” on the taskbar
• Mac: Open the Finder and click the eject icon that appears on the sidebar
Check the plug direction and insert it straight in.
(If the cable is inserted in the wrong direction, the plug could
become deformed and cause faulty operation)
[Access] (sending data)
• Do not disconnect
the USB connection
cable while [Access] is
displayed.
USB connection cable
Preparation:
• Charge the battery sufficiently.
Or, connect the AC adaptor
(optional) and DC coupler
(optional).
• When importing pictures from
the built-in memory, remove
any memory cards.
• Turn on the camera and
computer.
Copying still pictures and motion pictures recorded in [MP4]
(except AVCHD motion pictures)
To Next Page
Loading...
Need help?
General
